Reinstalling Firmware for the MXII
We are showing you two ways to reinstall the firmware for your MXIII.
- Reinstalling the MXIII firmware with an sd card.
- Reinstalling the MXIII firmware with a USB storage device
Most of the steps are the same for both. When they are different we will outline both steps.
First download your MXIII firmware. We have one version here:
Next you need an SD card or a usb that at least has a capacity of 1GB. After you download the file you will need to unzip the the zip file. Remember where you unzip them. You will need to copy them shortly.
Important! These files must be in the root directory of your device.
Insert your SD card or USB into the box.
Make sure your box has the power unplugged. The HDMI cable will need to be plugged in.
On your box at the back you will see a hole labelled ‘AV’. In the hole, at the very back is the reset button. Insert your chosen device into the hole and you will feel a clicking button at the end. While pushing and holding the reset button plug in the power cable.
With the reset button still pressed using your tool, the screen should flash up an opening logo.Hold in the reset button until the android figure comes up.
Remove your tool from the AV hole. The progress bar below the Android figure will move to the right for a bit and then after about two or three minutes you will see a menu screen.
Simply choose to ‘reboot now’.
Choose “Apply update from ext”
Select “Install from udisk”
Now your MXIII firmware should be reinstalled. Enjoy!
You can also view How to reinstall firmware for the MXQ here